Wall-Mounted Concealed Dual-Control Shower Faucet

Core advantage selling points

1.Wall-mounted concealed dual-control shower faucet with the main body pre-embedded into the wall, only the chromeplated control handle and decorative panel are exposed, saving 30% of the visual space on the wall compared to ordinary exposed faucets, creating a minimalist bathroom style, and to high-end decoration such as modern luxury and wabi-sabi style. The decorative panel adopts a flat bonding design, with a gap of ≤0.5mm the wall, avoiding the accumulation of dirt and making daily cleaning more worry-free.

2.Wall-mounted concealed dual-control shower faucet is made of H59-friendly brass casting, with a wall thickness ≥3mm, which is 20% higher than the industry standard in compressive strength, and there is no risk of from long-term water pressure impact, and it meets the safety standard for drinking water. Exposed parts adopt a five-layer thick chrome plating process, which is scratch- and corrosion-resistant, and still maintains a mirror-like gloss after long-term use.

3.The left and right double handles control cold and hot water separately, with red/blue identification, so that the elderly and children can also quickly master and accurately adjust the comfortable shower water temperature of 38–42℃, avoiding "sudden and sudden heat". The built-in pressure stabilizing valve core is compatible with a wide range of water pressure from 0.05–1.0MPa, it can also maintain stable water output for high-floor residents or during peak water use.

4.The main body reserves interfaces for overhead spray, hand-held shower, and outlet, which can be paired with different shower components to create a "overhead spray handheld bathtub filling" all-scene shower system. The pre-embedded pipe hole is 150mm standard size.

5.The valve core adopts a quick-release structure, and there is no need to chisel the wall for maintenance in later period, just replace the valve core inside the handle, and the maintenance cost is 60% lower than that of similar products. Provide 5 years of brass body quality + 2 years of easily damaged parts quality guarantee, non-human factors caused by leakage, damage can enjoy free repair or replacement.

Installation Precautions

1.Pre-construction Positioning

The pre-installed brass body must be aligned with the standard 150mm hole spacing for hot and cold water pipes. Use a level to ensure the body is horizontal, as misalignment will cause uneven water flow and affect handle installation.After embedding the main body, wrap the exposed thread interfaces with waterproof tape and apply waterproof sealant around the decorative panel to prevent water from seeping into the wall and causing mold or pipe corrosion.

2.Usage Precautions

The left handle controls hot water (red mark) and the right controls cold water (blue mark). Adjust the handles slowly to avoid sudden temperature changes, especially when bathing children or the elderly.Do not use excessive force when turning the handles, as this may damage the ceramic sealing structure. The handles are designed for smooth, light operation—if you feel resistance, stop and check for obstructions.

3.Maintenance Precautions

Clean the chrome-plated panels and handles with a soft cotton cloth and neutral detergent. Avoid abrasive cleaners that can scratch the plating or cause corrosion.If the mixer leaks or the handles become stiff, replace the ceramic cartridge by unscrewing the handle cap and fixing screw. Do not dismantle the embedded main body unless professional help is available.

4.Safety Precautions

Anti-scald Protection

The hot water outlet temperature may exceed 45°C in some cases. Keep children away from the mixer when adjusting hot water, and install a thermostatic mixing valve if you need to limit the maximum temperature.Ensure the installation area is at least 1 meter away from electrical outlets or appliances to avoid electric shock risks in wet bathroom environments.For embedded pipe leaks or major malfunctions, do not attempt to dismantle the wall yourself. Contact a qualified plumber to avoid damaging the waterproof layer or structural integrity of the wall.