1. This Three-way hot and cold water faucet adopts single handle temperature and flow adjustment, with a side knob for one-key switching "bathtub draining / shower water outlet", which meets the needs of both relaxing baths and daily showers without the need for additional equipment installation.
2. This Threeway hot and cold water faucet has a standard hole spacing design, with a universal hole spacing of 150mm that adapts to most household pre-embedded pipes. is no need to make additional changes to the water and electricity during decoration, and the installation compatibility is high.
3. Fine copper multi-layer electroplating: The H59 fine copper body is corrosion-resistant and lead-free, paired with a chrome plating thickness of more than 8μm, which not only has a mirror- gloss but also is scratch-resistant and wear-resistant, and is not easy to rust or peel after long-term use.
4. The valve core has a lifespan of than 500,000 times, and the switch feels smooth at all times; the surface grid texture not only enhances the anti-slip property when holding but makes the minimalist appearance more textured.
5. Adjust the flow up and down, adjust the temperature left and right, the operation logic is simple, and the elderly and children also quickly get started; the clear cold and hot signs avoid sudden changes in water temperature and scalding.
Installation method: Built-in / Wall-mounted (suitable for pre-embedded pipes on bathroom walls)
Installation hole spacing: cold and hot water hole spacing is 150mm (allowable error ±15mm)
Spout length: Approximately 180-220 (covering the bathtub area)
Main body material: H59/H62 refined copper (gravity casting process, corrosion resistant and lead-free)
Surface: Multi-layer electroplating (acid copper nickel chromium), plating thickness ≥ 8μm, salt spray test ≥ 24
Valve core type: Ceramic valve core (hardness ≥ 1200 HV, switch life ≥ 500,000 times)
Accessories material: Foaming device is ABS stainless steel, switching knob is engineering plastic / zinc alloy
Applicable water pressure: 0.1-0.5MPasuitable for home municipal water supply)
Working temperature: 0-90℃ (withstands hot water high temperature)
Water flow: Approximately 9-2L/min in full open state (built-in foaming device saves about 30% water)
Inlet interface: G1/ (national standard 4-thread, suitable for home cold and hot water angle valve)
Shower interface: G1/2 (can be connected to a handheld shower hose
Address
Changyang Industrial Zone, Xinqiao Town, Luqiao District, Taizhou City, Zhejiang Province, China
Tel
