Stainless Steel Single Hole Kitchen Faucet

Product features

Stainless steel single hole kitchen faucet is made of brushed stainless steel, with a matte metal appearance that is high-end, and at the time, it has the characteristics of scratch resistance, corrosion resistance, and easy cleaning. It is not easy to rust and change color after long-term use. The single handle design control the water volume by "pulling up and down" and adjust the cold and hot by "pushing left and right". The operation can be completed with one hand, the threshold of use is low.

Stainless steel single hole kitchen faucet has a single hole installation structure, which is compatible with most standard single hole sinks. The installation is simple and compatible with common family bathroom decoration styles. The water outlet is soft, and it is usually paired with a foaming device, which can make the water flow mix with to form a soft water column, reducing splashing.

Technical Specifications

Material: Main body made of 304 stainless steel (some styles can be selected with brass alloy);

Installation method Single hole sink installation, hole diameter of about 32-35mm;

Cold and hot water pipe interface: G1/2 standard interface (compatible with common valves);

Spout height: About 10-15cm (specific to the actual model);

Applicable water pressure: 0.1-0.5Pa (complies with the standard water pressure of household tap water);

Valve core type: Ceramic valve core (wear-resistant, well sealed, long service life)

Installation steps description

1. Preparation tools: wrench, plumber's tape, screwdriver (as required);

2. Pre-treatment of interfaces: 3-5 circles of plumber's tape around the external threads of the cold and hot water angle valve (to prevent leakage);

3. Pipe connection: pass cold and hot water hoses of the faucet through the opening of the wash basin, connect the hoses to the corresponding angle valves (usually marked with "C" for cold and "H" for hot water), and tighten them gently with a wrench;

4. Fix the faucet: under the wash basin, fix the faucet base on wash basin with the matched nuts (be careful not to tighten too much to avoid damaging the wash basin);

5. Test use: open the angle valve, pull the faucet, check the water output and whether the cold and hot water adjustment is normal, and observe whether each interface leaks .